TS-Learning Logo

Installation and building services engineering

Multilingual online modules for businesses across the DACH region – with no commitment, including a knowledge test and a certificate upon successful completion. Filter by your sector or search for specific modules.

1 - 6 out of 6 courses

Courses per page

Worker in a white protective suit, respirator, goggles and blue gloves scrapes an old plastered wall with a blade

Tightly bound asbestos

Identifying asbestos cement, low-dust removal, H-class vacuum, FFP3, airlock, work plan and disposal. This online safety instruction on the safe handling of firmly bound asbestos teaches the most important rules for working with asbestos-containing materials such as asbestos cement sheets in a compact way. It explains the health hazards of asbestos fibres and shows low-dust working methods as well as protective measures according to the TOP principle. Who is this training for? This mandatory instruction is aimed at employees who may come into contact with firmly bound asbestos during removal, refurbishment or conversion work. It is suitable as initial instruction before starting the work and as annual safety instruction for refresher purposes. The training also points out the employment bans for young people, pregnant women and breastfeeding mothers. What do participants learn? The online instruction covers the key hazards and protective measures. A particular focus is on preventing asbestos dust. An overview of the contents: Recognising hazards: asbestosis and mesothelioma, effect of smoking, clarifying suspected asbestos Low-dust working: non-destructive removal, constant wetting, H-class vacuum, ban on cut-off wheels, cleaning tools TOP principle: work plan, competent responsible person, suitable work equipment, cordoning off the work area Personal protective equipment: disposable coverall, FFP3 mask or full-face mask with P3 filter, protective gloves, tight-fitting safety goggles, overshoes Working indoors: dust-tight enclosure, entering and leaving through the single-chamber airlock Disposal and emergencies: asbestos big bags, licensed waste contractors, conduct in the event of unexpected release and after asbestos contact Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). In addition, health surveillance under the Ordinance on Health Surveillance at the Workplace (Verordnung über die Gesundheitsüberwachung am Arbeitsplatz, VGÜ) is covered. After completing the course, participants receive a certificate documenting the completed safety instruction. The training serves as support for the in-person instruction by the company's competent person and does not replace it.
12 languages
From €10.00Excl. VAT
Electrician in hard hat, safety glasses and hi-vis vest cuts a cable with pliers in a timber-frame buildinE

General Construction Site Safety – Electricians

5 safety rules, proper terminating, temporary site power, ladders, scaffolding and quartz dust. This online safety instruction for electricians on the construction site teaches the most important safety rules for everyday work in a compact and practical way. It combines general construction site safety such as fall protection, ladders and scaffolding with electrical engineering topics: from the 5 safety rules and proper stripping and terminating to a safe construction site power supply. Who is this training for? This mandatory instruction is aimed at electricians and qualified electrical workers who work on construction sites and in existing buildings. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. What do participants learn? The online instruction covers the key topics of construction site safety. A particular focus is on working safely with electricity. An overview of the contents: Electrical safety: 5 safety rules, verifying the absence of voltage with a two-pole voltage tester, construction site distribution boards and residual current devices (RCDs), first aid after electrical accidents Professional installation: stripping, wire end ferrules and crimping, terminating, cable pulling, wiring in control cabinets Fall protection: guardrails, floor openings, leaning ladders and stepladders, scaffolding and mobile aluminium scaffold towers Tools and machines: drilling and chiselling, wall chasers, angle grinders, cutting tools, lithium-ion batteries Hazards on the construction site: quartz dust, hazardous substances, hot work, load securing, lifting and carrying Personal protective equipment: S3 safety shoes, safety glasses, protective gloves, hearing protection, FFP2 mask Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Plumber wearing safety glasses and gloves safely installing heating pipes with water pump pliers in a boiler room.

General construction site safety for installers

Gas installations, refrigerants, press fitting, soldering, shafts, roof work and work on existing systems. This online safety instruction for plumbers and HVAC installers teaches the most important safety rules for installation work in plumbing, heating, ventilation and gas in a compact and practical way. It ranges from working at height, pipe processing and hot work to safe work on existing systems. Who is this training for? This mandatory instruction is aimed at installers in plumbing, heating, ventilation and gas engineering who work on construction sites and in existing buildings. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. What do participants learn? The online instruction covers the key topics of occupational safety for plumbers and HVAC installers. A particular focus is on working on pipes and systems. An overview of the contents: Pipe processing and machines: pipe cutting, pipe threading machine, press fitting tool, butt fusion welding machine, core drill, drain cleaning machine Hot work and gases: gas cylinders, torches and gas hoses, soldering and gas cartridges, welding fumes, fire protection Work on systems: isolating and depressurising, pressure testing, gas installations and gas leaks, heat pumps and refrigerants, carbon monoxide in boiler rooms Working at height: fall protection, roof work, ladders, scaffolding and mobile scaffold towers Special hazards: equipotential bonding when cutting pipes, quartz dust, wastewater and hygiene, suspected asbestos, shafts and confined spaces, heat Emergencies and PPE: electrical accidents, emergency calls and fire, respiratory protection, eye, hand and hearing protection Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG) as well as on the Construction Workers' Protection Ordinance (Bauarbeiterschutzverordnung, BauV) and the Work Equipment Ordinance (Arbeitsmittelverordnung, AMVO). The qualification under the F-Gas Regulation for work on the refrigerant circuit is not replaced by this instruction. After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Orange scissor lift and articulated boom lift with a work platform standing in a yard in front of a warehouse

Mobile work platforms

Boom lifts and scissor lifts: setup, tip-over hazard, safety harness and emergency lowering. This online safety instruction for mobile elevating work platforms teaches the most important safety rules for using boom lifts and scissor lifts in a compact and practical way. It ranges from the visual inspection and stable setup to safe work in the platform basket and correct conduct in the event of malfunctions and accidents. Who is this training for? This mandatory instruction is aimed at employees who operate mobile elevating work platforms such as boom lifts or scissor lifts indoors or outdoors. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18, with an internal operating permit and after instruction on the equipment and the company's conditions. What do participants learn? The online instruction covers the key hazards when working with mobile elevating work platforms. A particular focus is on preventing tip-overs and falls. An overview of the contents: Before use: visual inspection, inspection sticker, maximum load capacity, permitted area of use Safe setup: inclination angle and load-bearing ground, crushing and shearing points, distance from fall edges, securing against forklifts and cranes Working in the platform basket: safety harness and anchor points, entering only in the lowered position, 3-point contact during positioning travel Hazards during operation: tip-over and catapult effect, persons below the platform basket, live power lines, emergency lowering valve Malfunctions and maintenance: first aid, safe parking, repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
11 languages
From €10.00Excl. VAT
Red powder-actuated nail gun lying on a wooden workbench, with reinforcing bars, a steel profile and a box of nails nearby

Powder-actuated fastening tool

Safe fastening, suitable base materials, cartridges, through-penetration risk and malfunctions. This online safety instruction for powder-actuated fastening tools teaches the most important safety rules for handling the tool in a compact and practical way. It covers the typical hazards from flying fragments, noise, driven fasteners and propellant charges as well as the appropriate protective measures, from the safe fastening process to correct conduct in the event of malfunctions. Who is this training for? This mandatory instruction is aimed at employees who operate or maintain powder-actuated fastening tools. It is suitable as initial instruction before first use and as annual safety instruction for refresher purposes. The training also points out that powder-actuated tools may only be used by persons with documented training and not by persons under 18 years of age. What do participants learn? The online instruction covers the key hazards and rules of conduct when working with powder-actuated fastening tools. A particular focus is on preventing unintended firing. An overview of the contents: Hazards: flying fragments, work noise, fasteners passing through the material, propellant charge and hot tool Before fastening: visual inspection, unsuitable base materials such as hollow bricks, aerated concrete or thin sheet metal, checking for electrical, gas and water lines Safe fastening process: correct posture, pressing the tool fully perpendicular to the surface, never fastening towards persons, no re-driving of fasteners, firing rate Cartridges and maintenance: original cartridges, transport and storage, unloading before cleaning, procedure for misfiring cartridges Personal protective equipment: safety shoes, head protection, eye protection, hearing protection, protective gloves Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Cleaner in a safety harness stands in the basket of a boom lift and squeegees the glass facade of a tall building

Special Cleaning

Window cleaning at height, glass roofs, flat roofs, fall protection equipment and pressure washers. This online safety instruction for specialist cleaning teaches cleaning staff the most important safety rules for cleaning work with increased hazards in a compact and practical way. It ranges from fall protection on window, glass and roof surfaces to ladders and mobile scaffolding and the safe handling of cleaning agents and pressure washers. Who is this training for? This mandatory instruction is aimed at employees in specialist and building cleaning who clean, for example, exterior window surfaces, glass roofs, flat roofs or areas with hazardous machinery and installations. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. What do participants learn? The online instruction covers the key hazards in specialist cleaning. A particular focus is on working safely at height. An overview of the contents: Fall protection: window cleaning on elevated standing positions, glass roofs and skylights, flat roofs, barriers at fall edges, anchor points and rope routing Personal fall protection equipment: correct use of fall arrest equipment, helmet with chin strap, inspection of safety equipment, preventing pendulum falls Ladders and scaffolding: leaning ladders, extension ladders and stepladders, mobile aluminium scaffold towers, scaffold approval Danger zones: cordoning off and lookouts, work near machinery and installations, ban on lone working, distance from live power lines Hazardous substances and equipment: safety data sheets, eyewash bottle, using pressure washers safely Personal protective equipment: safety shoes, safety glasses, protective gloves, hearing protection, dust mask Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
15 languages
From €10.00Excl. VAT

Companies already using TS-Learn

Almi LogoArbeiterkammer Niederösterreich LogoArcelor Mittal LogoBanner LogoCargomind LogoEisen Neumüller LogoForvis Mazars LogoGiwog LogoGls Energie LogoGWK-infra LogoHABAU LogoHandler LogoHargassner LogoHertwich Logohfw-group LogoKönig Fachpersonal LogoKora LogoLagerhaus LogoMKW LogoPfahnl LogoRailmaint LogoReder Transporte LogoScandinavian Ground LogoSedlak LogoSimtex LogoTOG OÖ Theater und Orchester LogoTriplast 3 LogoWaizenauer LogoWeinbergmaier LogoWimberger LogoWirtschaftskammer Oberösterreich Logo