TS-Learning Logo

Mechanical and plant engineering

Multilingual online modules for businesses across the DACH region – with no commitment, including a knowledge test and a certificate upon successful completion. Filter by your sector or search for specific modules.

1 - 3 out of 3 courses

Courses per page

Yellow overhead travelling crane lifts a steel beam on lifting slings in a workshop, with machine tools and presses alongside

Crane, floor-controlled

Slinging loads, chain angle, side pull, lifting magnet, vacuum lifter and danger zone. This online safety instruction for pendant-controlled overhead cranes teaches the most important safety rules for everyday crane operation in a compact and practical way. It ranges from functional and visual checks and the correct slinging and lifting of loads to the safe use of lifting magnets and vacuum lifters. Who is this training for? This mandatory instruction is aimed at employees who operate pendant-controlled overhead cranes or assist in crane operation as slingers and signallers. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18, with an internal operating permit and after instruction on the crane and the company's conditions. What do participants learn? The online instruction covers the key hazards when working with overhead cranes. A particular focus is on slinging loads safely. An overview of the contents: Before use: functional check of limit switches, brakes and emergency stop, visual inspection, inspection sticker, safety shoes and protective gloves Slinging loads: suitable slings, centre of gravity, sharp edges and edge protection, maximum chain angle, hook safety latch Safe lifting: load capacity, avoiding side pull and swinging loads, free clearance, minimum distance to surroundings, communication with signaller and slinger Load handling attachments: lifting magnet and factors affecting holding force, vacuum lifter and suction pads Malfunctions and maintenance: first aid, repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
11 languages
From €10.00Excl. VAT
Worker in overalls, ear defenders and safety glasses, arms folded, in a metal workshop with a CNC machine and a press

General Occupational Safety Production

Safe at lathes and milling machines, when welding, at press brakes and in crane operation. This online safety instruction for production and metalworking teaches employees the most important safety rules for everyday work in a compact and practical way: from general rules of conduct and the safe handling of machine tools and welding equipment to sheet metal processing, load handling and personal protective equipment. Who is this training for? This mandatory instruction is aimed at employees in production, particularly in metalworking, steel construction and mechanical engineering, as well as in workshops. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. Apprentices are also informed about the restrictions that apply to them when working on machines. What do participants learn? The online instruction covers the key topics of occupational safety in production. A particular focus is on working safely on machines in metalworking. An overview of the contents: Machine tools and power tools: lathes and milling machines, bench grinders, guillotine shears, press brakes and folding machines, hydraulic presses, angle grinders and cut-off wheels, protective and emergency stop devices, handling of coolants and lubricants Welding: electric and oxy-fuel welding, welding in containers and confined spaces, transport and storage of gas cylinders, fire protection during hot work Loads and transport: crane operation, slinging loads, ergonomic lifting and carrying, load securing General hazards: electrical safety, cutting hazards, ladders and self-built scaffolding, hazardous substances Personal protective equipment: correct use of foot, eye, hand and hearing protection Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Red powder-actuated nail gun lying on a wooden workbench, with reinforcing bars, a steel profile and a box of nails nearby

Powder-actuated fastening tool

Safe fastening, suitable base materials, cartridges, through-penetration risk and malfunctions. This online safety instruction for powder-actuated fastening tools teaches the most important safety rules for handling the tool in a compact and practical way. It covers the typical hazards from flying fragments, noise, driven fasteners and propellant charges as well as the appropriate protective measures, from the safe fastening process to correct conduct in the event of malfunctions. Who is this training for? This mandatory instruction is aimed at employees who operate or maintain powder-actuated fastening tools. It is suitable as initial instruction before first use and as annual safety instruction for refresher purposes. The training also points out that powder-actuated tools may only be used by persons with documented training and not by persons under 18 years of age. What do participants learn? The online instruction covers the key hazards and rules of conduct when working with powder-actuated fastening tools. A particular focus is on preventing unintended firing. An overview of the contents: Hazards: flying fragments, work noise, fasteners passing through the material, propellant charge and hot tool Before fastening: visual inspection, unsuitable base materials such as hollow bricks, aerated concrete or thin sheet metal, checking for electrical, gas and water lines Safe fastening process: correct posture, pressing the tool fully perpendicular to the surface, never fastening towards persons, no re-driving of fasteners, firing rate Cartridges and maintenance: original cartridges, transport and storage, unloading before cleaning, procedure for misfiring cartridges Personal protective equipment: safety shoes, head protection, eye protection, hearing protection, protective gloves Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT

Companies already using TS-Learn

Almi LogoArbeiterkammer Niederösterreich LogoArcelor Mittal LogoBanner LogoCargomind LogoEisen Neumüller LogoForvis Mazars LogoGiwog LogoGls Energie LogoGWK-infra LogoHABAU LogoHandler LogoHargassner LogoHertwich Logohfw-group LogoKönig Fachpersonal LogoKora LogoLagerhaus LogoMKW LogoPfahnl LogoRailmaint LogoReder Transporte LogoScandinavian Ground LogoSedlak LogoSimtex LogoTOG OÖ Theater und Orchester LogoTriplast 3 LogoWaizenauer LogoWeinbergmaier LogoWimberger LogoWirtschaftskammer Oberösterreich Logo