TS-Learning Logo

Warehousing and logistics

Multilingual online modules for businesses across the DACH region – with no commitment, including a knowledge test and a certificate upon successful completion. Filter by your sector or search for specific modules.

1 - 6 out of 6 courses

Courses per page

Yellow overhead travelling crane lifts a steel beam on lifting slings in a workshop, with machine tools and presses alongside

Crane, floor-controlled

Slinging loads, chain angle, side pull, lifting magnet, vacuum lifter and danger zone. This online safety instruction for pendant-controlled overhead cranes teaches the most important safety rules for everyday crane operation in a compact and practical way. It ranges from functional and visual checks and the correct slinging and lifting of loads to the safe use of lifting magnets and vacuum lifters. Who is this training for? This mandatory instruction is aimed at employees who operate pendant-controlled overhead cranes or assist in crane operation as slingers and signallers. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18, with an internal operating permit and after instruction on the crane and the company's conditions. What do participants learn? The online instruction covers the key hazards when working with overhead cranes. A particular focus is on slinging loads safely. An overview of the contents: Before use: functional check of limit switches, brakes and emergency stop, visual inspection, inspection sticker, safety shoes and protective gloves Slinging loads: suitable slings, centre of gravity, sharp edges and edge protection, maximum chain angle, hook safety latch Safe lifting: load capacity, avoiding side pull and swinging loads, free clearance, minimum distance to surroundings, communication with signaller and slinger Load handling attachments: lifting magnet and factors affecting holding force, vacuum lifter and suction pads Malfunctions and maintenance: first aid, repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
11 languages
From €10.00Excl. VAT
Orange and black sit-down forklift truck with an overhead guard in a warehouse, next to a pallet and high-bay racking

Forklift Instructions, driver's seat controlled

Visual inspection, load chart, tipping hazard, racking, work platform, electric, diesel and LPG forklifts. This online safety instruction for sit-down forklifts teaches the most important safety rules for daily forklift operation in a compact and practical way. It ranges from the pre-use check and safe load transport and storage in racking to charging, refuelling and changing cylinders on electric, diesel and LPG forklifts. Who is this training for? This mandatory instruction is aimed at employees who operate sit-down forklift trucks. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18 and with a documented internal driving permit. What do participants learn? The online instruction covers the key hazards when working with forklifts. A particular focus is on transporting and storing loads safely. An overview of the contents: Before use: inspection sticker, visual inspection of lift chains, forks, brakes and tyres, securing against unauthorised use Safe operation: traffic routes, reversing with restricted visibility, ramps and uneven floors, tipping hazard, warning with the horn Loads and racking: load chart and load centre, load securing, storing above head height, loading racks, reporting rack damage Work platform: approved forklifts, securing with locking pins, maximum load, conduct in the platform Drive types: charging electric forklifts and explosion hazard, battery acid, diesel engine emissions and refuelling, cylinder change and leak test on LPG forklifts Malfunctions and maintenance: first aid, repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). The proof of competence (forklift licence) is not replaced by this instruction. After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
11 languages
From €10.00Excl. VAT
Orange scissor lift and articulated boom lift with a work platform standing in a yard in front of a warehouse

Mobile work platforms

Boom lifts and scissor lifts: setup, tip-over hazard, safety harness and emergency lowering. This online safety instruction for mobile elevating work platforms teaches the most important safety rules for using boom lifts and scissor lifts in a compact and practical way. It ranges from the visual inspection and stable setup to safe work in the platform basket and correct conduct in the event of malfunctions and accidents. Who is this training for? This mandatory instruction is aimed at employees who operate mobile elevating work platforms such as boom lifts or scissor lifts indoors or outdoors. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18, with an internal operating permit and after instruction on the equipment and the company's conditions. What do participants learn? The online instruction covers the key hazards when working with mobile elevating work platforms. A particular focus is on preventing tip-overs and falls. An overview of the contents: Before use: visual inspection, inspection sticker, maximum load capacity, permitted area of use Safe setup: inclination angle and load-bearing ground, crushing and shearing points, distance from fall edges, securing against forklifts and cranes Working in the platform basket: safety harness and anchor points, entering only in the lowered position, 3-point contact during positioning travel Hazards during operation: tip-over and catapult effect, persons below the platform basket, live power lines, emergency lowering valve Malfunctions and maintenance: first aid, safe parking, repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
11 languages
From €10.00Excl. VAT
Orange-red pedestrian pallet truck with a tiller handle in a warehouse in front of racking with boxed pallets

Pedestrian-controlled Forklift

Visual inspection, load centre, tipping hazard, pedestrian and ride-on operation and battery charging. This online safety instruction for pedestrian-controlled stackers teaches the most important safety rules for the daily use of the equipment in a compact and practical way. It ranges from the pre-use check and safe load transport and storage to charging the battery and correct conduct in the event of accidents. Who is this training for? This mandatory instruction is aimed at employees who operate pedestrian-controlled stackers in pedestrian or ride-on mode. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. The training also points out that operation is only permitted from the age of 18, with an internal driving permit and after instruction on the equipment and the company's conditions. What do participants learn? The online instruction covers the key hazards when working with pedestrian-controlled stackers. A particular focus is on safe driving and load transport. An overview of the contents: Before use: inspection sticker, visual inspection of lift chain, forks, tyres and belly button safety switch, safety shoes Safe operation: pedestrian and ride-on mode, reversing, ramps and uneven floors, traffic routes, warning with the horn Transporting loads correctly: avoiding overloading, load chart and load centre, load securing, storing above head height, lateral tipping hazard Charging the battery: ventilation, explosion hazard from hydrogen, battery acid Malfunctions and accidents: first aid, maintenance and repairs only by authorised competent persons Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Red powder-actuated nail gun lying on a wooden workbench, with reinforcing bars, a steel profile and a box of nails nearby

Powder-actuated fastening tool

Safe fastening, suitable base materials, cartridges, through-penetration risk and malfunctions. This online safety instruction for powder-actuated fastening tools teaches the most important safety rules for handling the tool in a compact and practical way. It covers the typical hazards from flying fragments, noise, driven fasteners and propellant charges as well as the appropriate protective measures, from the safe fastening process to correct conduct in the event of malfunctions. Who is this training for? This mandatory instruction is aimed at employees who operate or maintain powder-actuated fastening tools. It is suitable as initial instruction before first use and as annual safety instruction for refresher purposes. The training also points out that powder-actuated tools may only be used by persons with documented training and not by persons under 18 years of age. What do participants learn? The online instruction covers the key hazards and rules of conduct when working with powder-actuated fastening tools. A particular focus is on preventing unintended firing. An overview of the contents: Hazards: flying fragments, work noise, fasteners passing through the material, propellant charge and hot tool Before fastening: visual inspection, unsuitable base materials such as hollow bricks, aerated concrete or thin sheet metal, checking for electrical, gas and water lines Safe fastening process: correct posture, pressing the tool fully perpendicular to the surface, never fastening towards persons, no re-driving of fasteners, firing rate Cartridges and maintenance: original cartridges, transport and storage, unloading before cleaning, procedure for misfiring cartridges Personal protective equipment: safety shoes, head protection, eye protection, hearing protection, protective gloves Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers' Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT
Green skip loader lorry with a loaded skip on a building site, beside piles of rubble and sand

Roll-off Skip Loader / Skip Container Vehicle

Skip handling, load securing, pre-trip inspection and safe reversing with the skip loader. This online safety instruction for skip loaders and skip trucks teaches truck drivers the most important safety rules for everyday work in a compact way. It ranges from fitness to drive and pre-trip inspection to the safe lifting, setting down and tipping of skips, load securing and correct conduct in the event of accidents. Who is this training for? This mandatory instruction is aimed at drivers of skip loaders and skip trucks as well as at persons who assist with skip handling. It is suitable as initial instruction for new employees and as annual safety instruction for refresher purposes. What do participants learn? The online instruction covers the key hazards in the operation of skip loaders. A particular focus is on the safe handling of skips. An overview of the contents: Before setting off: fitness to drive and alcohol limit, driving licence and driver card, inspection sticker under Section 57a KFG, pre-trip inspection, vehicle documents Skip handling: lifting, setting down and tipping skips, attaching the chains, stabilisers and load-bearing ground, locking mechanism, safety distances Load securing: gross vehicle weight and axle loads, tarpaulins and container nets, stacked skips, diagonal lashing using the X and V method Hazards during operation: crushing hazard in the swivel area, reversing with a banksman, falling skips, ban on phone use Working on the skip: safe access via ladder, risk of cuts from sharp-edged material, high-visibility clothing and personal protective equipment Emergencies and damage: first aid and emergency call, accident report, leaking operating fluids, damage documentation Instruction under the ASchG & proof of completion The content is based on the obligation to provide instruction under Section 14 of the Austrian Workers’ Protection Act (ArbeitnehmerInnenschutzgesetz, ASchG). In addition, vehicle regulations such as the inspection sticker under Section 57a of the Austrian Motor Vehicles Act (Kraftfahrgesetz, KFG) are covered. After completing the course, participants receive a certificate documenting the completed safety instruction. The training is also ideal as a supplement to in-person instruction.
12 languages
From €10.00Excl. VAT

Companies already using TS-Learn

Almi LogoArbeiterkammer Niederösterreich LogoArcelor Mittal LogoBanner LogoCargomind LogoEisen Neumüller LogoForvis Mazars LogoGiwog LogoGls Energie LogoGWK-infra LogoHABAU LogoHandler LogoHargassner LogoHertwich Logohfw-group LogoKönig Fachpersonal LogoKora LogoLagerhaus LogoMKW LogoPfahnl LogoRailmaint LogoReder Transporte LogoScandinavian Ground LogoSedlak LogoSimtex LogoTOG OÖ Theater und Orchester LogoTriplast 3 LogoWaizenauer LogoWeinbergmaier LogoWimberger LogoWirtschaftskammer Oberösterreich Logo